Delivery & Installation more info
| Brand: Flashforge |
| Brand | Flashforge |
The Flashforge Adventurer 5M is a fast, friendly 3D printer that is as happy with your very first print as it is with a weekend of projects. An all-metal CoreXY frame moves the print head at up to 600mm/s with 20,000mm/s² acceleration, and automatic bed levelling takes care of the fiddly set-up that puts many people off 3D printing.
There is room for plenty on the 220 x 220 x 220mm build plate, from replacement parts and desk organisers to cosplay pieces and gifts, and the flexible PEI steel plate lifts off so finished prints pop free with a gentle bend.
What stands out
All-metal CoreXY speed
The CoreXY motion system sits in a rigid all-metal frame, so the Adventurer 5M can travel at up to 600mm/s and accelerate at 20,000mm/s² while keeping its accuracy.
A hotend that keeps up
The direct-drive extruder reaches 280°C, gets to 200°C in around 35 seconds and pushes up to 32mm³/s through a 0.4mm nozzle, so the plastic keeps pace with the frame.
Levelling done for you
Automatic bed levelling sets up the first layer, the part of a print most likely to go wrong. The removable PEI steel plate heats to 100°C, holds prints firmly while they print and flexes to release them when they are done.
Nozzles for every job
The Adventurer 5M works with 0.25mm, 0.4mm, 0.6mm and 0.8mm nozzles, from fine detail to quick, chunky parts. PLA and PETG print through the 0.4mm nozzle, and a 0.6mm nozzle opens up flexible TPU and carbon-fibre PLA-CF and PETG-CF.
Print from your computer
Send jobs over Wi-Fi or Ethernet, or from a USB stick, and run them from the 4.3-inch touchscreen. It works with FlashPrint 5, Orca-Flashforge and Orca Slicer, so you can stick with the software you know.
Protects long prints
A filament run-out reminder and power-loss recovery mean an empty spool or a power cut does not have to cost you hours of printing.
Key features
- Build volume: 220 x 220 x 220 mm
- Structure: All-metal CoreXY, open frame
- Speed: Up to 600 mm/s travel, 20,000 mm/s² acceleration
- Extruder: Direct drive, up to 280°C, 32 mm³/s flow
- Build plate: Flexible removable PEI steel plate, up to 100°C
- Bed levelling: Automatic
- Nozzle sizes: 0.25 / 0.4 / 0.6 / 0.8 mm
- Filaments: PLA, PETG, TPU, PLA-CF, PETG-CF
- Connectivity: Wi-Fi, Ethernet, USB
- Display: 4.3-inch touchscreen
- Software: FlashPrint 5, Orca-Flashforge, Orca Slicer
- Power: 350 W